 |

 |
|
 |
| IMPORTANT * The 22K requires the bootloader for updating firmware. Please download the current Bootloader version, BL101804 before attempting to update the firmware.
** The 26K requires the bootloader for updating firmware. Please download the current Bootloader version, BL061604 before attempting to update the firmware.
*** The 24K/24KPS/24KPVC/V-Jet require the bootloader for updating firmware. Please verify your machine
Bootloader version is up-to-date before attempting to update the firmware. If your version of bootloader
is earlier than BL031000 and/or your firmware version is 020900 (Date Code) or earlier, you must first
download the new bootloader, version BL031000. BootLoader Installation Instructions.
|
|
 |
 |
For Zip Files you will need to install Winzip or a similar program |
 |
 |
For PDF Files, you will need to install Adobe Acrobat Reader |
Secap™ printers are postnet certified. Secap™ printers have been tested and approved by the USPS
to print POSTNET barcodes to USPS specifications.
Printers support internal generation of 12 digit
postnet barcode using a CASS certified application.
This page lists the current firmware version for Secap printers and how to obtain the latest firmware.
Secap™ printers use three technologies to store the printer's firmware:
- EPROM
- Flash memory updatable using PC cards
- Flash memory updatable using a communication port
EPROM's replacement updates require tools and basic service knowledge. Flash memory technologies
require no tools and no service skills to update.
For information on Secap printers not listed, please send a request to our technical support department
or contact us at 800.809.8645.